Wind energy grid connected inverter can directly convert the wind energy connected to the wind turbine into electrical energy , and upload it to the home power grid without the need for additional equipment Inverter output

By directly connecting to any socket in the home, the entire system can be connected. Inverter controls the energy generated by the fan and adjusts the voltage frequency.

By adjusting the voltage phase, the pure sine wave output is successfully integrated into the power grid for safe use.

This grid connected product is equipped with a built-in bridge rectifier and unloading controller, which can maintain the speed of the wind turbine and maintain the voltage of the wind turbine at all times.

Within the rated working voltage range of the inverter, It also has a high voltage protection function, and when the wind is too strong, the unloading control system cannot maintain the power of the wind turbine. The output voltage will disconnect the controller from the wind turbine, making it very safe to use.

 

 

When installing this product to connect to the power grid, it is recommended to operate it as a certified electrician. 

 The left end of the inverter has 5 terminals, 3 red terminals are used to connect to the three-phase power of the fan, and 2 black terminals are connected to the unloading resistor.

In addition, there are 4 indicator lights, 3 green indicator lights, and 1 red indicator light. When it is detected that there is power grid connection, the three green indicator lights start to cycle and flash.  This indicates that the inverter is operating under normal conditions. The flashing speed of the indicator light is calculated based on the output power. The higher the output power, the faster the speed.  If no grid input is detected and the red indicator light turns on, the inverter will not output power, which is called “island protection”.

When the power of all household loads is greater than the output power of the inverter, all loads will prioritize the use of electricity generated by the inverter, and any shortfall will be caused by the power grid

Supplement. When the power of all household loads is less than the output power of the inverter, the remaining electricity generated by the inverter will be automatically uploaded to the power grid, making the electricity meter Invert. (It is recommended to install a separate electricity meter). If it is necessary to connect multiple inverters and supporting fans to the power grid, the same option can be chosen as the first one. Inverters are connected in parallel and then connected to the power grid.

Precautions for product application:

★ Please install the inverter correctly according to the instructions and connect the ground wire

Non professional personnel are not allowed to disassemble the machine. Only qualified maintenance personnel can repair this product.

★ Please install the inverter in a low humidity and well ventilated area to avoid overheating and remove flammable and explosive materials from the surrounding area.

★When using this product, avoid children touching or playing to avoid electric shock.

★If you have any questions, please contact relevant personne